1M 12V 40W Ceramic Cartridge Heater Wire For 3D Printer
- Germany imported Ceramic Cartridge Heater Wire
- Material: Stainless steel (304)
- Barrel Diameter: Φ 6mm x 20mm
- Voltage: 12V & 24V
- Nominal Power: 40 Watt
- Barrel Diameter: 0.236inch / 6mm
- Barrel Length: 0.79inch / 20mm
- wiring: 39inch / 1M
►Keep away from small children.
►This product is only suitable for 3D printer use indoors.
►To ensure your safety and proper operation of the equipment, we recommend that you should fully understand the operation and safety features of the 3D printer.
►Please read your use guideline of the 3D printer manual carefully before installing and using it: <3D printer consumable: PLA (190°C-230°C) or ABS (230°C-250°C)>
►3D printer replacement parts, Always shut off power to the circuit before starting installation work.
►The surface temperature of the 3D printer might be high, and be careful not to touch the heating element to prevent injury.
►3D printer initial operation, Do not run the equipment Unattended state.
►When printing with a PLA(190°C-230°C) or ABS(230°C-250°C)consumable, if the temperature sensor and other accessories fail, it may cause high-temperature hazards. Do not run the equipment Unattended state.
►To ensure the users will use the product safely and properly, Please read your 3D printer manual first and follow the instructions step by step before using the product.
►Due to the variety of possible end-uses, it is ultimately the responsibility of the customer to determine a product’s suitability for a particular application.